The research work published in JOEH found that common filaments used in 3D printers can emit VOCs during the printing process.

Study Calls 3D Printing's Safety Into Question

"The use of HEPA, as well as activated carbon filters does not solve the problem of air pollutants formed during 3D printing and there is the need for a new filtration system," the authors wrote. "Photocatalytic filters are one of possible solutions."

  • May 24, 2017

A study newly published in the Journal of Occupational and Environmental Hygiene (JOEH) confirms that commonly used and commercially available thermoplastic filaments (acrylonitrile-butadiene-styrene, polylactic acid, polyethylene terephthalate, and nylon) used in these printers emit volatile organic compounds (VOCs) during the printing process. JOEH is published jointly by the American Industrial Hygiene Association® and the American Conference of Governmental Industrial Hygienists (ACGIH®), which are also co-sponsors of the AIHce EXP conference next month in Seattle.

The conference program includes a session about 3D printing on Monday, June 5, starting at 10 a.m.

The study's authors are Szymon Wojtyła and Tomasz Baran of SajTom Light Future Ltd. in Czaniec, Poland -- Baran is also affiliated with the Department of Chemistry at the University of Milan, Italy -- and Piotr Klama of 3DKreator in Cracow, Poland. ACGIH notes that EPA has found excessive exposure to VOCs can lead to eye, nose, and throat irritation; headaches; loss of coordination; and nausea.

"The use of HEPA, as well as activated carbon filters does not solve the problem of air pollutants formed during 3D printing and there is the need for a new filtration system," the authors wrote. "Photocatalytic filters are one of possible solutions. Photocatalytic air treatment has the potential for degradation of organic and inorganic contaminants including volatile organic compounds from air." They recommend using good ventilation and also reported that the first fused deposition modeling (FDM) 3D printer (Accura Genius3D) equipped with a photocatalytic filtration system has been commercially available since September 2016.

The authors found that the four common filaments emit VOCs even at temperatures below the printing temperature.

Product Showcase

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

Featured

Most   Popular