The types and numbers of lifesaving devices appropriate for each type of vessel are left to the Coast Guard

Rule Requires PFDs for Crews of Uninspected Commercial Barges and Sailing Vessels

Before 2010, certain uninspected commercial vessels, including barges and sailing vessels, were not covered by the statute requiring the Coast Guard to regulate lifesaving devices on uninspected vessels -- the devices were required on such commercial vessels only if they carried passengers for hire.

The U.S. Coast Guard published a final rule Sept. 10 that will require personnel aboard uninspected non-passenger commercial barges and sailing vessels to wear a personal flotation device (PFD) when exposed to the hazard of falling overboard. The rule aligns the USCG regulations with the 2010 Coast Guard Authorization Act; before 2010, certain uninspected commercial vessels, including barges and sailing vessels, were not covered by the statute requiring the Coast Guard to regulate lifesaving devices on uninspected vessels -- the devices were required on such uninspected commercial vessels only if they carried passengers for hire.

The final rule says this rulemaking promotes the Coast Guard's marine safety mission. Until the 2010 Coast Guard Authorization Act was enacted into law, section 4102(b) applied only to uninspected vessels "propelled by machinery," thus excluding most barges and some sailing vessels unless they carried passengers for hire. As amended, section 4102(b) now requires all non-recreational uninspected vessels, regardless of vessel type or mode of propulsion, to make an appropriate form of lifesaving device available for the use of individuals on board the vessel. The types and numbers of devices appropriate for each type of vessel are left to the Coast Guard's discretion, as are the requirements for installing, maintaining, and using those devices.

When the agency published a notice of proposed rulemaking last year, comments came in response from the barge industry, among others. Based on comments regarding the number of vessels affected by the final rule, USCG re-evaluated that issue and determined that an estimated 62,240 vessels are affected by it.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence

Webinars