CSB Investigation Finds No Record of Inspections on Freedom Industries Chemical Storage Tanks

The company is responsible for a leak from one of its tanks. The leak contaminated Charleston, W.Va., residents' drinking water in January 2014.

The U.S. Chemical Safety Board reported that it has found no record of a formal, industry-approved inspection performed on any of the chemical storage tanks at Freedom Industries prior to the massive leak on Jan. 9, 2014, that contaminated the drinking water of up to 300,000 residents of nine West Virginia counties. It appears that informal inspections may have occurred, but investors have found a lack of appropriate engineering inspections with the prescribed frequency and rigor of inspections, according to CSB's announcement.

The agency commissioned an inspection of tank 396 and similar tanks at Freedom Industries, scanning the tank interior and the surrounding topography of the river bank. The investigation found that two small holes ranging in size from about 0.4 inch to 0.75 inch in the bottom of the 48,000-gallon tank 396 were caused by corrosion, likely resulting from water leaking through holes in the roof and settling on the tank floor. The inspection also found a similar hole penetrating the bottom of tank 397, containing the same chemical at the facility, which is located in Charleston, W.Va. The increasing corrosion in these tanks went unnoticed until the bottom of 396 was breached and up to an estimated 10,000 gallons of the chemical 4-methylcyclohexane methanol (MCHM), mixed with propylene glycol phenyl ethers, or PPH, made their way through the underlying mixture of soil and gravel under the facility and into the Elk River.

Investigator Lucy Tyler, in a statement, said, "While our investigation is still under way, it has become clear that Freedom Industries did not have a rigorous inspection program for these chemical storage tanks sited close by the Elk River and just upstream from the facility supplying water to hundreds of thousands of people."

Workers began dismantling 10 steel tanks at the site on July 16, the West Virginia Department of Environmental Protection reported. Four other tanks will be left on site to store stormwater runoff. DEP inspectors will be on site throughout the project, and an asbestos removal contractor will be on hand to inspect for possible asbestos-containing materials in areas that could not be included in an asbestos inspection conducted in June, according to the department's news release.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars