DOL Resolves OSHA Citations Against Explosives Maker Following Blast that Killed Two Workers

OSHA cited Black Mag LLC in October 2010 for more than 50 willful, egregious, and serious violations of safety standards in connection with a May 14, 2010, explosion at the company's Colebrook, N.H., facility in which two employees died while manufacturing a gunpowder substitute.

As part of an agreement with the U.S. Department of Labor, Black Mag LLC, doing business as BMI and as Black Mag Industries, and Craig Sanborn, the company's president, managing member, and primary owner, have surrendered Black Mag LLC's explosives manufacturing license and will permanently refrain from employing workers in any explosives-related business enterprise.

"What we seek in all cases is for the employer to eliminate hazardous conditions and take effective action to prevent their recurrence," said Marthe Kent, New England regional administrator for OSHA. "This resolution accomplishes those goals by ensuring that neither Black Mag LLC nor Mr. Sanborn will ever again place employees at risk in any kind of business that uses or makes explosives."

OSHA cited Black Mag LLC in October 2010 for more than 50 willful, egregious, and serious violations of safety standards in connection with a May 14, 2010, explosion at the company's Colebrook, N.H., facility in which two employees died while manufacturing a gunpowder substitute. The employer contested the citations and fines to the independent Occupational Safety and Health Review Commission.

Black Mag LLC since has withdrawn its notice of contest and agreed to entry of an order that it violated the Occupational Safety and Health Act. The company has certified that the violations have been abated by termination of all production operations, which occurred when the 2010 explosion destroyed its facility and put it out of business. Because it was licensed by the Bureau of Alcohol, Tobacco, Firearms and Explosives, the company was required by OSHA to execute ATF's Notice of Discontinuance of Business, which the department has turned over to the ATF.

Black Mag LLC and Sanborn also agreed to the entry of a summary enforcement order in the U.S. Court of Appeals. Violation of such an order would permit the department to initiate proceedings for contempt of court, in which potential sanctions could include incarceration to secure compliance.

In the resolution papers, Sanborn agrees that he will not conduct, establish, own, or manage by himself, with, or through others, any current or future business that is covered anywhere under OSHA's explosives or process safety management standards if that business employs workers or independent contractors. Additionally, he will have no involvement in any enterprise that has employees if it is located within 1,000 yards of another business that is covered under OSHA's explosives or process management safety standards.

"While nothing can ever bring Jesse Kennett or Don Kendall back to their loved ones, this resolution is designed to prevent future deaths or injuries," said Michael Felsen, the Labor Department's regional solicitor for New England. "It includes a provision that will allow the Labor Department to charge Mr. Sanborn with contempt in federal court if he violates the terms."

The settlement agreement has been filed with the independent Occupational Safety and Health Review Commission and will become the Commission's final order on July 21, 2011. After that, the department will file the papers for an enforcement order in the U.S. Court of Appeals for the First Circuit against both Black Mag LLC and Sanborn.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. 3

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured

Webinars