Anchoring Skills into Daily Actions

To move to global-class safety performance and culture, it's critical to apply high-level anchoring for reinforcement and ongoing improvement.

Once is not enough when it comes to assimilating fresh info and new skills into changed actions. Experience is clear -- a single exposure rarely sets new skills. In fact, I've found "the first is often the worst." Multiple effective exposures are necessary for working out the kinks with newly acquired methods.

For example, a single golf lesson with Ernie Els (or similar world-class athlete) is unlikely to improve your game as much as 10 with a local club pro. And Ernie's one-and-done will likely cost a lot more (of course, this does give you bragging rights). Even better? Multiple lessons with a local pro interspersed with numerous practices on your own.

It's also important to remember this principle when transmitting expectations of improvement. Once upon a time, we applied the terms "Trainers" or "Instructors" to those workers (of clients) we prepared to deliver our MoveSMART® interventions. But we saw these titles limited their expectations to just presenting, then job done. So we now call these agents of change "Instructor-Catalysts" with three understood levels of responsibility. Initially, they pass along mental strategies and physical prevention techniques (in this case, for preventing strains/sprains, slips/trips/falls, or hand injuries). Then they coach to answer questions and make specific worksite applications. Third, they focus on site approaches for sustaining and expanding daily use of methods and techniques.

In my experience, most of us tend to employ features of habit. "Reinforcement" is no exception. In fact, most companies default toward applying the same approaches:

  • celebrations, such as yearly events
  • awards/incentives
  • external monitoring
  • reminders - which can be personal (clothing, awards), visual (posters, slogans), or organizational (campaigns, promotions)
  • getting supervisors involved asking about safe actions
  • formal refreshers and coaching

While all of these have value, they're usually not enough to solidify newly offered methods into daily actions.

Alternatively, there's the negative, "big stick" stuff: writeups, discipline, forced days off, planned embarrassment, firing, and more. These "punishing" strategies often result in workers going undercover, hiding near-misses, not reporting, shifting focus away from themselves (and what really occurred). All of which get in the way of elevating individual safe judgment and actions.

Characteristics of 'Validating' Contacts
We've found the best approach for setting newly exposed skills into actions is to have: a) a large number of b) validating contacts. You've likely heard statements that it requires so many thousands of exposures to learn a new skill. Numerous contacts set a pattern, create default actions, build an automatic pilot program. But the quality of contacts is also critical to actual change. Here are characteristics of "validating" contacts:

  • for maximum receptivity -- are well timed (e.g., to avoid a recurrence right after a close call, mentally rehearsing the safest way to accomplish a task).
  • for self-motivation -- offer benefits that interest the user rather than solely push prevention. For example, rather than reminding people how to use stride techniques in inclement weather so they don't slip and get hurt, instead focus on how these methods can boost their balance, strength, and surefootedness when doing anything important to them (fishing, hiking, etc.). And that by practicing methods at work, they can improve their performance everywhere.
  • for energized acquisition -- build in discovery. Ask open-ended questions to spur thinking and problem-solving, rather than just tell them to "act safe." To maximize energy and buy-in, design reinforcements to be kinesthetic and participative; help them try and experience rather than passively listen. Also, carve out small time pockets for practicing new skills with minimal get-it-done pressures.
  • for best application -- are individualized to a person's actual need for the skill (not a generic poster, nor a picture of person lying hurt at bottom of stairs).
  • for ongoing adjustment -- emphasize self-monitoring. This can be done many ways, such as directed questions. ("Where do you most feel forces in your body when pushing?" or "In which of these two positions do you feel less tension in your lower back?")
  • for maximizing personal satisfaction -- help them see themselves as successful, making a positive difference. People tend to continue doing activities in which they experience success.
  • for best external support when watching and offering feedback -- "prefer conversation to observation," in the words of expert change agent Paul McClellan.
  • for promoting higher-level organizational safety culture -- coordinate reinforcement into a surround system where others (peers, peer-catalysts, managers, executives) remind, watch for positive applications (seeking out and recognizing successful "safety heroes") and communicate back successes organization-wide.

It's definitely important to make a strong first impression when introducing new knowledge and skills. But to move to global-class safety performance and culture, it's as critical to apply high-level anchoring for reinforcement and ongoing improvement.

This article originally appeared in the December 2010 issue of Occupational Health & Safety.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

Featured

Artificial Intelligence

Webinars