WISHA Offers Ladder Safety Tips for Holiday Decorating

Each year, nearly 900 workers in Washington state are injured from falls related to ladders. The risk grows during the holidays when many workers hang lights and other seasonal decorations, or take them down come January.

The combination of workers doing tasks they normally do not do, along with an all too often careless approach to ladder safety, can lead to the worst holiday ever. Falls from ladders have resulted in permanent disability and even death.

Last year, Department of Labor & Industries inspectors cited several employers for ladder safety violations related to holiday decorating, including workers hanging decorations from elevated platforms without fall protection, workers standing on top of ladders, and other cases of improper ladder use.

This year, L&I is reminding employers that state law requires they train workers who must use ladders on how to use them and how to recognize ladder hazards.

Here are 10 tips for ladder safety when hanging decorations:

  1. Carefully inspect the ladder for defects, checking for cracks, corrosion, and that bolts and rivets are secure. Tag and remove unsafe ladders from service.
  2. Make sure the ladder’s feet work properly and have slip-resistant pads.
  3. Use a fiberglass ladder if there is any chance of contact with electricity.
  4. When setting the ladder, look for a safe location with firm, level footing and rigid support for the top of the ladder. Be sure to set it at an angle per the manufacturer’s guidance.
  5. When climbing off a ladder at an upper level, make sure the ladder extends three feet above the landing.
  6. When climbing the ladder, use three points of contact – keep one hand and both feet or both hands and one foot in contact with the ladder at all times.
  7. Never carry any load that could cause you to lose balance.
  8. Never stand on top of a ladder.
  9. Don’t pull, lean, stretch, or make sudden moves on a ladder that could cause it to tip over. A scaffold or other safe working surface may be a better choice for your task.
  10. Avoid setting the ladder near exit doors, near the path of pedestrian, or vehicular traffic.

For more information on ladder safety, visit www.Lni.wa.gov/Safety and look under “L” for ladder.

Product Showcase

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

Featured

Webinars