OSHA to Hold Informal Meetings on Proposed Combustible Dust Standard

OSHA has scheduled two informal stakeholder meetings to solicit comments and suggestions on combustible dust hazards in the workplace. The agency said it will use comments from these meetings in developing a proposed standard for combustible dust. The meetings are scheduled for Feb. 17 at 9 a.m. and 1:30 p.m., at the Marriott Perimeter Center, 246 Perimeter Center Parkway, Atlanta, Ga., 30346.

Since 1980, more than 130 workers have been killed and more than 780 injured in combustible dust explosions. A Feb. 7, 2008, explosion at an Imperial Sugar Co. plant in Port Wentworth, Ga., killed 14 people and resulted in OSHA issuing nearly $8.8 million in penalties. OSHA is holding the meeting in Atlanta to make it easy for victims' families and others with relevant information about this deadly incident to attend.

"Fourteen people were killed in a combustible dust explosion that was preventable. The deaths need to stop," said Assistant Secretary of Labor for OSHA David Michaels. "Information gathered from these meetings will help OSHA move ahead on this urgently needed standard and prevent more deaths from combustible dust explosions."

Combustible dusts are solids ground into fine particles, fibers, chips, chunks, or flakes that can cause a fire or explosion when suspended in air under certain conditions. Types of dusts include metal (aluminum and magnesium), wood, plastic or rubber, coal, flour, sugar, and paper, among others.

Those interested in participating must register by submitting a notice of intent to participate by Feb. 3. Notices can be submitted electronically by registering at https://www2.ergweb.com/projects/conferences/osha/register-osha-stakeholder.htm. Submissions can also be faxed to 781-674-2906 with the following noted: "Attention: OSHA Combustible Dust Stakeholder Meeting Registration," or mailed to ERG, Inc., 110 Hartwell Avenue, Lexington, Mass., 02421; Attention: OSHA Combustible Dust Stakeholder Meeting Registration.

For general and technical information, contact David Wallis, OSHA, Office of Engineering Safety, at 202-693-2277. Press inquiries should be directed to Jennifer Ashley, OSHA, Office of Communications, at 202-693-1999.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. 3

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. 3

Featured

Webinars