Study Shows How Carbon Nanotubes Can Affect Lining of Lungs

Carbon nanotubes are being considered for use in everything from sports equipment to medical applications, but a great deal remains unknown about whether these materials cause respiratory or other health problems.

Now a collaborative study from North Carolina State University, The Hamner Institutes for Health Sciences, and the National Institute of Environmental Health Sciences shows that inhaling these nanotubes can affect the outer lining of the lung, though the effects of long-term exposure remain unclear.

Using mice in an animal model study, titled "Carbon Nanotubes Reach the Sub-Pleural Tissue in Mice," the researchers set out to determine what happens when multi-walled carbon nanotubes are inhaled. Specifically, researchers wanted to determine whether the nanotubes would be able to reach the pleura, which is the tissue that lines the outside of the lungs and is affected by exposure to certain types of asbestos fibers which cause the cancer mesothelioma. The researchers used inhalation exposure and found that inhaled nanotubes do reach the pleura and cause health effects.

Short-term studies described in the paper do not allow conclusions about long-term responses such as cancer. However, the inhaled nanotubes "clearly reach the target tissue for mesothelioma and cause a unique pathologic reaction on the surface of the pleura, and caused fibrosis," said Dr. James Bonner, associate professor of environmental and molecular toxicology at NC State and senior author of the study. The "unique reaction" began within one day of inhalation of the nanotubes, when clusters of immune cells (lymphocytes and monocytes) began collecting on the surface of the pleura. Localized fibrosis, or scarring on parts of the pleural surface that is also found with asbestos exposure, began two weeks after inhalation.

The study showed the immune response and fibrosis disappeared within three months of exposure. However, this study used only a single exposure to the nanotubes. "It remains unclear whether the pleura could recover from chronic, or repeated, exposures," Bonner said. "More work needs to be done in that area and it is completely unknown at this point whether inhaled carbon nanotubes will prove to be carcinogenic in the lungs or in the pleural lining."

The mice received a single inhalation exposure of six hours as part of the study, and the effects on the pleura were only evident at the highest dose used by the researchers--30 milligrams per cubic meter (mg/m3). The researchers found no health effects in the mice exposed to the lower dose of one mg/m3.

The study was co-authored by Bonner, Dr. Jessica Ryman-Rasmussen, Dr. Arnold Brody, and Dr. Jeanette Shipley-Phillips of NC State, Dr. Jeffrey Everitt who is an adjunct faculty at NC State, Dr. Mark Cesta of the National Institute of Environmental Health Sciences (NIEHS), Earl Tewksbury, Dr. Owen Moss, Dr. Brian Wong, Dr. Darol Dodd and Dr. Melvin Andersen of The Hamner Institutes for Health Sciences. The study is published in the Oct. 25 issue of Nature Nanotechnology and was funded by The Hamner Institutes for Health Sciences, NIEHS and NC State's College of Agriculture and Life Sciences.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured