FRA Requiring Locks for Locomotive Cabs

A final rule being published April 9 includes a requirement for "securement devices." It was requested by the Brotherhood of Locomotive Engineers and Trainmen after a conductor was killed during a 2010 robbery.

The Federal Railroad Administration has published a final rule updating its railroad locomotive safety standards, saying in the rule that the changes incorporate existing industry and engineering best practices related to locomotives and to the electronics in them. One significant change is the added requirement that new and remanufactured locomotives be equipped with a "securement device" -– a lock -– to prevent unauthorized intrusions.

This results from a request made two years ago by the Brotherhood of Locomotive Engineers and Trainmen after a CSX conductor, Fred Gibbs, was shot to death in the cab of his train’s lead locomotive during a June 2010 robbery.

The union's president, Dennis Pierce, wrote a letter on Sept. 22, 2010, to FRA's administrator asking for greater security of cabs to protect train crews. Pierce noted an engineer was wounded during the same event in which Gibbs was killed by an intruder who entered the cab while their train was being held on a siding.

Pierce cited data from two surveys showing that most BLET members could not secure their cabs from such an attack. According to BLET, Gibbs died four days after the release of the Teamsters High Alert 2 rail security report, which said 51 percent of train crews surveyed had no way to lock or secure their locomotive cab against unauthorized access while occupied and 73 percent had no way to lock it while it was unoccupied.

The new FRA final rule is effective June 8, 2012. It changes the existing requirement for periodic inspections of locomotives to provide for a 184-day inspection interval for any locomotive equipped with microprocessor-based control systems with self-diagnostic capabilities. This change alone will produce $378 million in savings for railroads during the next 20 years, far more than the rule's $27.7 million in total costs of the rule during that period, FRA estimates.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars