Metals Finishing Firm Fined $300K for Hexavalent Chromium Exposure, More

"The employer had ample information alerting him to the hazards posed by hexavalent chromium, yet allowed his employees to continue to be exposed," said Bill Fulcher, director of OSHA's Atlanta-East Area Office.

OSHA is proposing $300,400 in penalties against Aerospace/Defense Coatings of Georgia Inc. in Macon, Ga., for 19 health violations.

OSHA began its inspection in May after receiving a complaint concerning personal protective equipment and the handling, storing, and disposing of chemicals. Inspections were conducted at all three Aerospace/Defense Coatings of Georgia plants and followed up on violations from 2005 and 2008.

The company is being cited with four alleged willful violations with a proposed penalty of $224,000. The violations are associated with respirator protection, chromium (VI) overexposure, personal protective equipment, and failing to perform periodic monitoring of chromium (VI) exposure. The agency defines a willful violation as one committed with intentional knowing or voluntary disregard for the law's requirements, or with plain indifference to worker safety and health.

The citations also include eight alleged repeat violations with a proposed penalty of $50,400. The violations are related to hazardous waste, emergency response, written programs, personal protective equipment for acids, failing to provide employee information and training, and respirator training and storage. A repeat violation is issued when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years.

Also, there are seven alleged serious violations with a proposed penalty of $26,000. The violations include failing to train employees to respond to hazardous waste emergencies, failing to post the results of chromium (VI) levels that were above the permissible exposure limit in an accessible location, failing to establish a regulated area where employees' exposure to airborne concentrations was in excess of the permissible exposure limit, failing to provide a change area to prevent cross-contamination, failing to ensure surfaces contaminated with chemicals were cleaned, failing to institute a medical surveillance program, and not providing information and training for employees exposed to chromium (VI). A serious citation is issued when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

"The employer had ample information alerting him to the hazards posed by hexavalent chromium, yet allowed his employees to continue to be exposed," said Bill Fulcher, director of OSHA's Atlanta-East Area Office. "OSHA will not tolerate this type of inaction."

The company has 15 business days from receipt of the citations and proposed penalties to comply, request an informal conference with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars