Flood Recovery Work Swamped with Hazards

As residents of the northeast U.S. recover from flooding and associated damage from the recent multi-day nor'easter storm that swamped the region, OSHA urges workers and members of the public engaged in cleanup activities to be aware of the hazards they can encounter and the necessary steps they should take to protect themselves.

"Recovery work should not put you in the recovery room," said Robert Kulick, OSHA's regional administrator in New York. "Flood recovery work encompasses a wide range of safety and health hazards, which can be minimized by knowledge, safe work practices and personal protective equipment."

Cleanup work can involve restoring electricity, communications, water and sewer services; demolition work; removal of floodwater from structures; entry into flooded areas; cleaning up debris; tree trimming; structural repair; roadway and bridge repair; use of cranes, aerial lifts and other heavy equipment; hazardous waste operations and emergency response activities; and repair of dams and levees.

Inherent hazards may include illness from exposure to contaminated water or food; exposure or heat stress; downed electrical wires; carbon monoxide and electrical hazards from portable generators; fall and struck-by hazards from tree-trimming or working at heights; burns; lacerations; musculoskeletal injuries; being struck by traffic or heavy equipment; and drowning from being caught in moving water or while removing water from flooded structures.

OSHA notes that protective measures should involve evaluating the work area for all hazards; task-specific hazard exposure monitoring; utilizing engineering or work practice controls to mitigate hazards; using personal protective equipment; assuming all power lines are live; following proper hygiene procedures; using portable generators, saws, ladders, vehicles, and other equipment correctly; and using traffic work zones.

OSHA’s comprehensive Web site is designed to keep disaster site workers safe during cleanup and recovery operations: http://www.osha.gov/OshDoc/flood-tornado-recovery.html.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. 3

Featured