EPA Proposes Stronger Air Quality Standards for Sulfur Dioxide

For the first time in nearly 40 years, the Environmental Protection Agency is proposing to strengthen the nation's sulfur dioxide (SO2) air quality standard to protect public health.

Power plants and other industrial facilities emit SO2 directly into the air. Exposure to SO2 can aggravate asthma, cause respiratory difficulties, and result in emergency room visits and hospitalization. People with asthma, children, and the elderly are especially vulnerable to SO2’s effects.

"Short-term exposures to peak SO2 levels can have significant health effects--especially for children and the elderly--and leave our families and taxpayers saddled with high health care costs," said EPA Administrator Lisa P. Jackson. "We're strengthening clean air standards, stepping up monitoring and reporting in communities most in need, and providing the American people with protections they rightly deserve."

EPA is taking comment on a proposal to establish a new national one-hour SO2 standard, between 50 and 100 parts per billion (ppb). This standard is designed to protect against short-term exposures ranging from five minutes to 24 hours. Because the revised standards would be more protective, EPA is proposing to revoke the current 24-hour and annual SO2 health standards.

EPA also is proposing changes to monitoring and reporting requirements for SO2. Monitors would be placed in areas with high SO2 emission levels as well as in urban areas. The proposal also would change the Air Quality Index to reflect the revised SO2 standards. This change would improve states’ ability to alert the public when short-term SO2 levels may affect their health.

The proposal addresses only the SO2 primary standards, which are designed to protect public health. EPA will address the secondary standard--designed to protect the public welfare, including the environment--as part of a separate proposal in 2011.

EPA first set National Ambient Air Quality Standards for SO2 in 1971, establishing both a primary standard to protect health and a secondary standard to protect the public welfare. Annual average SO2 concentrations have decreased by more than 71 percent since 1980.

The public comment period will be open for 60 days after the proposal is published in the Federal Register. The agency will hold a public hearing on Jan. 5, 2010 in Atlanta. EPA must issue final standards by June 2, 2010.

More information about the proposal, click here.

Industrial Hygiene Product Showcase

  • M-Power Defense System™ Impact 3 Glove

    M-Power Defense System™ Impact 3 Glove

    Sacrifice Nothing: Experience next level impact protection with the M-Power Defense System™ from Magid. Heavy-duty back-of-hand protection with a unique ventilated honeycomb design that offers extreme protection with 9 times more airflow and maximum flexibility. Try the unbeatable combination of lightweight Impact 3 protection and amplified grip! You can have it all. Try it FREE! 3

  • The MGC Simple Plus

    The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without needing to be recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Additionally, it is durable enough to withstand the harshest treatment and environments, which is why it has an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as Gas Clip Technologies’ new GCT External Pump. Visit gascliptech.com for more information. 3

  • Kestrel Heat Stress Monitoring System

    Kestrel Heat Stress Monitoring System

    Ensure worker safety & regulatory compliance with the Kestrel® Heat Stress Monitoring System. With real-time remote access to critical data, leaders have the information to make timely decisions preventing workplace heat-related injuries and incidents. The Kestrel 5400 Heat Stress Tracker with LiNK connects via Bluetooth to a wall-mounted remote monitoring tablet showing current data. Use the Kestrel LiNK app to manage and log work conditions, view graphs, and create shareable reports. The Ambient Weather Network (AWN) online portal and app offer remote monitoring capabilities for 24-7 visibility, including a custom dashboard and the ability to set alerts for changing conditions. 3

Featured

  • Safety 2023 Hits Record Numbers

    The annual ASSP event running June 5-7 in San Antonio has enjoyed its best attendance to date. Read Now

  • Outgoing ASSP President Looks Back on Past Year

    Christine Sullivan, CSP, ARM, reflects on some key initiatives from her term and shares what she’ll be doing going forward. Read Now

  • Safety 2023 Emphasizes Career Development

    Career Development Center on the event’s expo floor helps safety professionals advance their careers in a number of ways. Read Now

  • ASSP Slates Date for Safety 24

    The association called on safety professionals to mark their calendars for next year’s show, which will be in a new location and new time of year. Read Now

  • Safety 2023 Keynote: Sharing Stories to Make Meaningful Relationships

    Safety 2023 Keynote: Sharing Stories to Make Meaningful Relationships

    Award-winning musician and songwriter Jimmy Yeary shows attendees of ASSP’s safety conference and expo in San Antonio how storytelling can create relationships that lead to change. Read Now

Webinars