The Orange County Convention Center housed the National Safety Congress & Expo in October.

NSC 2009: Headlines and Optimism Return

Many companies introduced new products and initiatives at the Oct. 26-28 expo, and while attendance was mediocre, exhibitors generally were upbeat.

There's no doubt the weak economy depressed attendance at this year's National Safety Congress & Expo, which took place Oct. 25-30 in Orlando, its expo running from Oct. 26 through Oct. 28. The aisles were almost empty on Wednesday, restaurant and carry-out food lines were short, and hotels were quick to make deals if you wanted to book a few rooms at the last minute.

This report sounds bleak, if you're a PPE manufacturer or service provider, and the third-quarter financials released by some of the largest in the past few weeks haven't been robust. But the exhibitors were in a good mood nonetheless. (Some still would prefer to see the Congress & Expo held in alternate years, as the bigger A+A show is in Germany, but this has been suggested for years.) Many companies were launching new products again at this show, and they said their sales are improving as they head into 2010.

What new offerings were on display? Defibtech and Cintas demonstrated a compact AED with a viewscreen that shows how to perform CPR and defibrillation with illustrations and text. BW Technologies by Honeywell touted its new GasAlert Quattro, a four-gas monitor with a flashing green signal to alert the wearer and those nearby that it is in proper operating mode. Miller Electric introduced a PAPR, the Coolbelt and Coolband cooling systems for welders, and its Titanium series of welding helmets. Superior Manufacturing Group showcased RedStop™, a coating applied to the underside of its NoTrax® floor mats to increase friction between the mat and a smooth floor surface so the mat won't slide. Capital Safety was demonstrating the ExoFit NEX™, a complete redesign and upgrade of its popular ExoFit fall harness introduced about 10 years ago. Pure Safety brought to the expo its new Learning and Safety Management System, a Software as a Service platform to help users automate administrative tasks and track and report important safety and training information. New gloves, training products, monitors, and PPE of all types -- high-vis apparel in particular -- were on display.

Top Names Share Timely Ideas
As usual, the event was a draw for some of the most illustrious names in the U.S. safety industry. The Occupational Keynote on Oct. 27 alone featured a panel consisting of acting OSHA chief Jordan Barab, NIOSH Director Dr. John Howard, and former OSHA head John Henshaw. University of Washington School of Public Health clinical professor Dr. Michael Silverstein served as moderator for the gathering, which focused on addressing "Occupational Safety and Health Under the Obama Administration." The panelists were in agreement that, though challenges exist, it is an era of progress and "moving forward," in general.

Barab said that, thanks to a 10 percent increase for OSHA under the Obama budget, the agency is now hiring and on the lookout for at least 100 new safety inspectors. "It's the most we've seen in a long time," Barab said of the increase. He also noted that DOL Secretary Hilda Solis had challenged the agency to increase its diversity so that it better reflected 21st Century America. And because about half of workplace fatalities happen in the construction industry, and half of those involve Hispanic workers, Barab promised a 2010 summit devoted to protecting the Latino workforce. Meanwhile, acknowledging that musculoskeletal injuries continue to be "the most serious problem facing American workers today," Barab said OSHA is looking to team with progressive companies -- businesses with "spine and spirit" -- in its work on forming an effective and lasting ergonomics standard. "We haven’t yet decided how we're going to approach it," he said. "We need to figure out how to move the ergonomic practices used successfully at the best companies to the rest, those who haven't quite seen how to incorporate it." On that front, as well as others facing the agency, Barab was optimistic, even echoing Obama's mantra at one point, saying, "Yes we can--we can work together to reach new solutions and accomplish new initiatives."

Howard, who also is the coordinator of the World Trade Center Health Program, likewise said that although the nation faces "a list of challenges in 2009," it remains an "exciting time." He wasted no time in noting that the current H1N1 situation is one of those challenges and said it is absolutely critical that institutions engage in "global risk assessment-type thinking." He emphasized that a significant supply shortage of N95 respirators is likely through the fall and winter, for example, and encouraged workplaces to engage in risk-assessment calculations and advanced planning, to consider acquiring reusable elastomeric respirators or PAPRs, and, where shortages exist, to deploy "prioritized respirator use logic," selectively doling respirators to those who need them most based on the intensity and duration of exposure to the hazards. "Clearly some advanced planning is necessary," he said, adding that in situations where it is impossible to acquire or maintain enough respirators, health care administrators may, after doing all they can to document their efforts to obtain the respirators, possibly have to resort to surgical face masks for some modicum of protection. "They are not fit tested and cannot completely prevent exposure, but they are better than nothing when nothing else exists," he said. "I do not think we can return to an era when health care workers' exposure to transmissible diseases is written off as exposure to 'diseases of life,' as worker's comp refers to it. We need to take care of the sick and those who care for the sick."

Henshaw, who headed OSHA from August 2001 through December 2004, said that while the agency remains "the world's best act at protecting workers," the legislation that created it, the OSH Act of 1970, is "woefully out of date," and he urged Congress to "step forward" on updating it. "Our rulemaking process needs to be brought up to speed, and it needs to be depoliticized, to the extent that's possible, and we need Congress's help."

Meanwhile, while OSHA's enforcement strategy needs to be "strong, fair, and effective," enforcement should be only part of the agency's overall strategy, he said. OSHA should follow EPA's model of teaming with the Department of Justice and reaching settlements with fined companies, Henshaw added. Those companies typically then agree to make improvements and undergo routine audits.

"It's an important leverage the agency could use to get more sustainable results, he said. Henshaw also emphasized the need for OSHA to preserve and even amp up its Voluntary Protection Programs, which foster cooperative relationships among management, labor, and OSHA at worksites that have implemented comprehensive safety and health programs. "VPP needs to be improved, no doubt, but we need it there," Henshaw said. "VPP companies are the ones leading in best practices, and we have to encourage those who are doing the right things to do them even better."

About the Authors

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Ronnie Rittenberry is Managing Editor of Occupational Health & Safety.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 3

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. 3

Featured

Webinars