PPE


Three N.Y. Contractors Fined $116,312 Following Fatal Wall Collapse

OSHA's investigation found that at the time of the incident, employees were filling an 18-foot-high by 65-foot-long concrete block wall with cement when the wall collapsed, killing one employee and hospitalizing three others.

$243,360 in Fines Issued to Maine Contractor for Fall Hazards

OSHA inspectors found four Lessard employees exposed to potentially life-threatening falls of 23 feet while working without fall protection on a steep-pitched roof at a work site in Lewiston, Maine.

Sawing masonry pieces with portable masonry saws was identified as among the most hazardous tasks.

IRSST Finds Tunnel Drillers at Highest Silica Risk

The Montreal research agency's database identified a group of skilled workers that includes bricklayers and heavy equipment operators as the second group exposed.

Methylene Chloride Exposure Leads to Firm's $49,000 Penalty

"Methylene chloride exposure can have very serious health effects, such as cancer and cardiac distress," said Paula Dixon-Roderick, director of OSHA's area office in Marlton, N.J.

New NIOSH Fact Sheet Highlights Trenching Safety

From 2000−2009, 350 workers died in trenching or excavation cave-ins—an av¬erage of 35 fatalities per year.

Donning, Doffing Decision Still Debated

A trade association and the U.S. Labor Department offered very different interpretations of the U.S. Supreme Court's 2005 decision in IBP, Inc. v. Alvarez when they commented on its application to FSIS inspectors.

Low Rate of Lung Function Decline in World Trade Center Responders: Study

Decreased lung function was more likely for officers with respiratory symptoms, those who were present when the towers collapsed, and those who worked long hours at the WTC site.

Wood Pallet Firm Busted for Machine Guarding, PPE Violations

OSHA initiated an inspection on Feb. 1 as part of its National Emphasis Program on Amputations. As a result, the company was cited for 18 serious violations.



Steel Manufacturer Fined $206,000 for Recordkeeping Violations

The willful violations address the company’s failure, from 2007 to 2010, to record standard threshold shifts on the OSHA 300 Log when employees’ hearing tests revealed that they experienced a work-related STS and the employees’ total hearing level was 25 decibels or more above audiometric zero.

Condo Owner Gets Prison Term for Failing to Notify Employees of Asbestos Risk

The owner and manager of a California condominium complex were sentenced for conspiring to violate the Clean Air Act’s asbestos work practice standards during the renovation of a 204-unit apartment building in Winnetka, Calif., in 2006 – work that caused asbestos to be released into the complex and the surrounding community.

$107,900 in Fines Issued to New Jersey Contractor for Fall Hazards

A willful violation was issued due to the company permitting employees to install trusses of approximately 35 feet at the leading edge of the building without safety nets or personal fall arrest systems.

PIP Acquires Eyewear Maker Bouton

The Bouton brand and its safety glass and goggle business are being acquired, but not the Lavoptik eyewash, VisionAid eyewear cleaning products, or eyewear accessories line.

Capital Safety Acquires Colombian PPE Maker

The deal secures a strategic position in a region that is expected to experience significant growth in the industries both companies serve, according to Capital Safety.

OSHA Starts NEP on Primary Metals Industry

This new National Emphasis Program aims to protect workers from chemical and physical hazards. Some are exposed to metal dusts and fumes, carbon monoxide, lead, and silica, according to inspection and BLS data.

Detecting and Containing Arc Flash Incidents

Power analytics software calculates potential arc flash threats in real time, recommending appropriate safety procedures and PPE needed to work in the vicinity.

The primary sources of information when determining the components likely to be in the fume are the MSDS and/or the technical data sheet from the manufacturer of the consumable electrode/wire.

Welding Fume and Gas Exposure

Welding fume exposure tends to be highly variable due to several exposure factors.

How Much Are Your Employees' Eyes Worth?

A safety eyewear program can be effective in lowering worker's compensation premiums. Rates are based on the number of accidents, not their severity.

The Value of Ear Plug Fit Testing

Only one factor was found to be a consistent predictor of good ear plug fit: one-on-one training.

This is an example of a pseudoisochromatic test plate.

Israel Dvorine: Pioneer in Color Vision Testing

Defective color vision is a risk factor as the number of occupations relying on color grows.

ANSI Panel OKs New Chemical Permeation Testing Standard

The ASTM F2815 standard explains how to use a computer program called a permeation calculator to analyze data following a permeation test.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars