Articles


NIJ Taking Public Comments on Bomb Suit Testing Standard

Nov. 14 is the comment deadline on the draft standard, which was developed by a panel of technical experts and reviewed by an Advisory Working Group with representatives from organizations that included the National Bomb Squad Commanders Advisory Board, International Association of Chiefs of Police, DHS, and the FBI.

OSHA Publishing RFI on Updated PELs

The agency asks for comments on the 205-page request for information to be submitted within 180 days.

Stair and Cabinet Manufacturer Cited after Employee Amputation

The Newington, Connecticut, company faces fines from OSHA.

OSHA Seeking Proposals for Outreach Training Program

OSHA is looking for proposals for both the 10-hour and 30-hour online courses.

DOT Agencies, USFA Produce Best Practices Document for Crude Oil Emergencies

Their partnership has produced a reference sheet for emergency responders.

The ammonium nitrate fire and massive explosion in West, Texas, killed 15 people and injured more than 250 others in 2013. (CSB photo)

CSB Calls for Changes in Emergency Response Guidebook

The safety board said it should offer better guidance for handling ammonium nitrate fires like the one that turned deadly in West, Texas.

MSHA Chief Says Pattern of Violations Reforms Have Made Mines Safer

Assistant Secretary Joseph A. Main addressed the changes as they neared their second anniversary.

NIOSH Signs Memorandum to Advance Nanotechnology Research

NIOSH has signed the memorandum of understanding with the Colleges of Nanoscale Science and Engineering at SUNY Polytechnic Institute in Albany, N.Y.



The Arc Flash Hazard Analysis Requirements Are Not New

The Occupational Safety and Health Act of December 29, 1970, states “An Act: To assure safe and healthful working conditions for working men and women …” Section 5 of the Act titled Duties goes on to state that the employer “shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.”

The Shortage of Qualified Workers – What can be done?

Unemployment and layoff statistics continue to plague industry and are consistently making the news headlines. It may seem hard to believe but, despite national unemployment rates that often hover near double digits, many industries are experiencing worker shortages; workers who are well-trained and qualified. Some industries report that, despite an abundant labor pool, they still have positions for which they can't find qualified candidates to fill. According to a trade’s shortage survey, skilled-trade jobs, which include electricians, are the hardest jobs to fill.

Some 7,000 American drivers per day were treated in emergency departments following motor vehicle crashes in 2012, CDC reported.

Big Day for CDC: #20Million Memorial and Auto Crash Report

The first is an online memorial to the estimated 20 million Americans who have died from smoking or secondhand smoke since the first Surgeon General's report on smoking and health 50 years ago.

Canadian Railroad Revises Safety Procedures After 2013 Train-Truck Collision

No one was hurt in the May 2013 collision at a private grade crossing.

Electrical Hazard Risk Assessments

Safety assessments of electrical equipment and systems should be a planned and scheduled event to help ensure a safe and reliable electrical system.

OSHA Cites Ohio Employer After Supervisor's Death

The man was injured when he was struck by a metal door.

OTC Pain Medications More Effective for Acute Pain: NSC

With hydrocodone combination products being moved to Schedule II, Americans may not be able to refill their prescriptions.

The proposed change would specifically mention PPE for the eyes, face, head, hand, foot, and extremities, along with protective clothing, respiratory protection, and protective shields and barriers.

Tweaks to PPE Standard Before CA Standards Board

The changes in General Industry and Construction Safety Orders are proposed for adoption Oct. 16.

MIOSHA Offering Safety and Health Improvement Grants

There is $500,000 available from the Michigan Occupational Safety and Health Administration for these grants, which are part of the agency’s celebration of the 40th anniversary of Michigan's program for workplace safety and health.

Cal/OSHA to Investigate After Successful High-Rise Rescue

A senior safety engineer with the agency worked with Tractel Inc. and the Orange County Fire Department to rescue two window washers stuck on a building’s 18th floor Oct. 1.

Training and the Millennial Generation

The point is that using mobile technology is second-nature for millennials and pretty much for everyone in the workforce. Provide e-learning so employees can train at their convenience, when it best fits into their workflow.

Embrace the Power of Mobile E-Learning Now

You might see the trends and think it seems easy enough to tell users to start training from a smartphone or tablet. It would be great if it were that simple. However, there are a lot of challenges to overcome when supporting mobile learning.

Product Showcase

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars