NRC Seeks Comments on Revised Dose Limits to Lens of the Eye

The agency says the international radiation protection community may follow the International Commission on Radiological Protection's recommended limit of of 20 mSv (2 rem) per year, versus the current U.S. limit of 150 mSv (15 rem) per year.

The Nuclear Regulatory Commission has asked for comments from stakeholders about possibly lowering the current U.S. occupational exposure limit for radiation to the lens of the eye. NRC hasn't begun rulemaking on the issue, but its notices said the international radiation protection community may follow the International Commission on Radiological Protection's recent recommended limit of of 20 mSv (2 rem) per year, averaged over defined periods of 5 years, with no single year exceeding 50 mSv (5 rem). The current U.S. limit is seven times higher: 150 mSv (15 rem) per year.

"In particular, the International Atomic Energy Agency has specifically considered and is now incorporating, the new limits into the revision of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources," NRC's notice stated.

Protecting the eyes against the effects of ionizing radiation is designed primarily to prevent the formation of cataracts, and the sensitive part of the eye for this health effect is the lens. it noted. The radiation dose to the eye is defined by 10 CFR 20.1003 as the lens dose equivalent (LDE) at a tissue depth of 0.3 centimeters. Cataract formation falls under the class of radiation effects referred to as deterministic (tissue reactions, in current ICRP terminology). "At doses above the threshold, the severity of cataract formation increases with dose, but the radiation-induced incidence below the threshold dose is believed to be essentially zero. Currently, 10 CFR part 20 limits annual occupational exposures to the lens of the eye to 150 mSv (15 rem) per year (10 CFR 20.1201)," the notice said.

NRC asked for comments on the ICRP recommendations by Oct. 31. The commission said it seeks early input before making any decision about whether to consider this issue for future rulemaking.

To submit a comment, visit www.regulations.gov and search Docket ID NRC-2009-0279.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence