Ric-Man International Cited for Willful Violation in Worker Fatality

The company was previously cited for cave-in and trenching hazards, according to OSHA.

After the death of a 45-year-old, untrained diver, Ric-Man International Inc. was cited for 19 safety violations, including one classified as willful, by OSHA, the agency announced. The employee died while completing surface-supplied air diving during underwater construction activities for the City of Weston, Florida, on June 10, 2014.

"Ric-Man International exposed employees to serious safety hazards when feasible methods existed to protect employees from cave-in and drowning hazards," said Condell Eastmond, OSHA's area director in Fort Lauderdale. "The company must take the necessary precautions to prevent employees from exposure to these hazards."

OSHA issued a citation for a willful violation to Ric-Man International for failure to provide cave-in protection for employees working inside an excavation approximately 12 feet deep. OSHA standards require that all trenches and excavation sites 5 feet or deeper be protected against sidewall collapses. Protection may be provided through shoring of trench walls, sloping of the soil at a shallow angle, or by using a protective trench box. OSHA had cited the company four times previously for lack of cave-in protection and excavation hazards.

Thirteen serious violations were issued to Ric-Man International for failure to ensure workers who performed diving operations were experienced and trained to perform underwater tasks safely; provide divers with a backup air supply, safety harness, and two-way voice communication for emergencies; and to plan and assess risks associated with diving, including underwater conditions, obstructions, and visibility. OSHA reported the company also failed to provide dive team members with CPR training.

Proposed penalties total $161,000.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

Featured

Webinars