Contractor, Subcontractor Fined After Worker's Fatal Fall from Water Tower

OSHA has cited two contractors responsible for the rehabilitation and painting of a municipal water tower in Epping, N.H., for alleged violations of safety standards following the Aug. 7, 2009, death of a worker who fell 90 feet from the tower.

The agency's inspection found that the deceased worker's employer, Bullins Painting Inc., the Eden, N.C., subcontractor performing the tower work, failed to provide him with fall protection. Both Bullins Painting and the project's general contractor, Utility Services Inc. of Perry, Ga., failed to inspect fall protection equipment before each use, protect vertical lifelines against cuts and abrasions, and provide a ladder cage or equivalent safeguard for tower access ladders.

"This case is a clear and grave example of the human cost incurred when required fall protection safeguards are absent, ignored, or inadequate," said Rosemarie Ohar, OSHA's New Hampshire area director. "The loss of a worker's life could have been prevented if these protective measures had been in place and in use."

OSHA identified additional safety and health hazards for Bullins employees, including improper anchorage points for the lifelines; an uninspected suspended scaffold; respirator protection deficiencies; overexposure to respirable dust, fumes and solvents; improper transfer of flammable liquids; smoking while mixing flammable liquids; electrical hazards; and failing to appropriately monitor the inside of the water tank for oxygen-deficient atmospheres before workers entered it. Both employers also were cited for recordkeeping violations.

All told, Bullins Painting has been issued three willful, 16 serious, and one other-than-serious citations, with $187,800 in proposed fines while Utility Services Co. was issued one willful, two serious, and three other-than-serious citations, with $93,000 in fines.

Both companies have 15 business days from receipt of their citations and proposed penalties to comply, meet with OSHA, or contest the findings before the independent Occupational Safety and Health Review Commission. The inspection was conducted by OSHA's Concord Area Office in New Hampshire.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured

Webinars