2 Employers Cited After Workers Found with Elevated Levels of Arsenic, OSHA Says

2 Employers Cited After Workers Found with Elevated Levels of Arsenic, OSHA Says

One employer faces about $124,780 in proposed penalties while the other faces $53,574.

Two employers are facing citations and proposed penalties after workers were found to have “elevated levels of arsenic.”

According to a news release, OSHA received a referral from the Georgia Poison Center after screening tests revealed the workers’ elevated levels. The agency inspected Arch Wood Protection Inc and the maintenance contractor at the site, Mullins Mechanical & Welding LLC of Carrollton, both of which were working at a site in Conley, Georgia, about 10 miles south of Atlanta.

It was found that a worker's exposure to arsenic was “approximately 20 times above the permissible exposure limit” while drum dumping, according to the citation. A worker's—the citation does not specify if it was the same worker or a different one—exposure was also about 3.8 times higher than the limit when performing the same activity. The employer also did not give respirators to workers going into the area where the drum dumping was occurring, the citations allege.

Per OSHA, Arch Wood Protection was cited for:

  • “Allowing hazardous inorganic dust to accumulate on desks, food packaging, lockers, refrigerators and the inner surfaces of workers’ respirators.
  • Not requiring employees using respirators to remove facial hair that might prevent a proper fit and seal.
  • Allowing workers to enter regulated areas without a respirator.
  • Not requiring contractors to change clothing and decontaminate properly at the end of their shifts.
  • Allowing pallets of materials to block emergency eyewash and shower stations.
  • Not providing adequate eye protection for workers handling inorganic arsenic acid samples.”

In total, OSHA cited Arch Wood Protection for nine violations. The employer—which also faces $124,780 in proposed penalties—contested the findings.

Mullins Mechanical & Welding was cited for not using “adequate work practice controls” and not making sure certain workers showered when they finished working, among other violations, and faces proposed penalties of $53,574, per the citation.

About the Author

Alex Saurman is the Content Editor for Occupational Health & Safety.


Industrial Hygiene Product Showcase

  • Vaask

    Vaask

    Vaask (V-ahh-sk) is inspired by the Norwegian word for “wash” and embodies the desire for a more modern class of clean. The touchless hand sanitizing fixture provides a superior performance engineered for no drips, no mess. The laser sensor accurately dispenses sanitizer from the 2-liter sanitizer cartridge, refillable with any alcohol-based gel of your choice. Vaask can be customized to complement the design of any space and comes in three mounting options. 3

  • The MGC Simple Plus

    The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without needing to be recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Additionally, it is durable enough to withstand the harshest treatment and environments, which is why it has an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as Gas Clip Technologies’ new GCT External Pump. Visit gascliptech.com for more information. 3

  • SECUMAX 350 SE

    SECUMAX 350 SE

    Efficient, ergonomic, and eco-friendly. Safety is about to get a whole lot greener with MARTOR's new safety knives made of recycled plastic coming soon! Contact us today for more information and to request a free sample. 3

Featured

Webinars