Hazard Alert Follows Two Severe Injuries Involving Demolition Robots

It recommends preparing a job hazard analysis with operators for each new job to identify and control hazards and using the manufacturer's safety instructions to establish the risk zone for the specific machine, attachment, and task.

The Washington State Department of Labor & Industries has published a Hazard Alert about two severe injuries suffered by workers who were operating remote-controlled demolition machines, also known as demolition robots.

One worker was a specialty trade contractor using a machine fitted with a shear attachment to demolish an HVAC system. According to the alert, the worker was wearing a waist-mounted remote controller attached to the machine by a wire. He repositioned the machine and then had to move the power cable before extending the outrigger. In the process he accidentally bumped the remote control against the machine, which moved and pinned him between the outrigger and a wall. He tried to free himself but lost consciousness. Co-workers had to cut power to the machine and try to push it over with a skid steer. The worker's chest was severely crushed, causing him to miss work for several months.

The second case described in the alert involved the operator of a machine fitted with a breaker attachment to chip concrete during a generator installation project. The operator was standing in a tight location between the machine and an excavation wall; as he tried to apply more pressure on the tip of the breaker, the outrigger raised off the ground, and then the machine shifted forward and the outrigger came down, crushing the operator's foot.

The alert says the employer in this latter case conducted a JHA that identified the swing radius of the machine's arm as a hazard but did not recognize the potential of being crushed under the outrigger. However, the manufacturer's safety instructions warned never to stand where there is a risk of being crushed.

The alert makes these recommendations:

  • Prepare a job hazard analysis with operators for each new job to identify and control hazards. Use the manufacturer's safety instructions to establish the risk zone for the specific machine, attachment, and task.
  • Always stay outside the risk zone when the machine is in operation and do not enter until the machine is put into emergency stop mode or de-energized.
  • Consider using a proximity warning system, such as those based on radio frequency identification (RFID), to maintain a safe worker-to-machine distance.
  • Train operators to manage power cables and to continually monitor the process for hazards and redefine the risk zone.
  • Ensure operators always read and follow manufacturer’s provided safety instructions.
  • Consider using a spotter to assist the operator.

Download Center

HTML - No Current Item Deck
  • Safety Management Software - Free Demo

    IndustrySafe Safety Software’s comprehensive suite of modules help organizations to record and manage incidents, inspections, hazards, behavior based safety observations, and much more. Improve safety with an easy to use tool for tracking, notifying and reporting on key safety data.

  • Create Flexible Safety Dashboards

    IndustrySafe’s Dashboard Module allows organizations allows you to easily create and view safety KPIs to help you make informed business decisions. Our best of breed default indicators can also save you valuable time and effort in monitoring safety metrics.

  • Schedule and Record Observations

    IndustrySafe's Observations module allows managers, supervisors, and employees to conduct observations on employees involved in safety critical behavior. IndustrySafe’s pre-built BBS checklists may be used as is, or can be customized to better suit the needs of your organization.

  • Why Is Near Miss Reporting Important?

    A near miss is an accident that's waiting to happen. Learn how to investigate these close calls and prevent more serious incidents from occurring in the future.

  • Get the Ultimate Guide to Safety Training

    When it comes to safety training, no matter the industry, there are always questions regarding requirements and certifications. We’ve put together a guide on key safety training topics, requirements for certifications, and answers to common FAQs.

  • Industry Safe
comments powered by Disqus

OH&S Digital Edition

  • OHS Magazine Digital Edition - May 2019

    May 2019

    Featuring:

    • RESPIRATORY PROTECTION
      Why Pick a PAPR? 
    • FIRE SAFETY TRAINING
      Fire Safety: Plan, Prevent, Train, Recover
    • PROTECTIVE APPAREL
      The Truth About Heat Stress and FRC
    • AIHCE EXP 2019 PREVIEW
      Underestimated No More
    View This Issue