Inspections Matter

No certified inspector ever performed an internal inspection of the failed vessel during the six years it was in use, according to CSB's video.

One more reminder from the U.S. Chemical Safety and Hazard Investigation Board about why thorough inspections matter (along with correcting any problem you find thereby): Stress corrosion cracking in the 8-inch-thick steel wall of a pressure vessel caused its catastrophic failure on Dec. 7, 2009, at the NDK Crystals, Inc. plant in Belvidere, Ill., according to an investigative report approved by the board Nov. 14, 2013. That vessel was 120 days into a 150-day crystal manufacturing cycle when it ruptured. NDK did not inspect any of the plant's eight pressure vessels, and the cracking in this one went undetected for years, the board determined, as illustrated in its "Falling Through the Cracks" video about the explosion.

The blast hurled projectiles more than 200 yards, killing a motorist at a nearby filling station and injuring someone in a nearby building when a piece of debris crashed through a wall.

A consultant hired by NDK's insurer investigated an earlier accident, when hot, caustic material leaked from another vessel's lid, found that stress corrosion cracking had caused it, and strongly recommended that the pressure vessels not be returned to service, but NDK did not follow that recommendation. No certified inspector ever performed an internal inspection of the failed vessel during the six years it was in use, according to CSB's video. The video was released simultaneously with the CSB investigation report.

"The video dramatically describes the important findings of the CSB investigation: Pressure vessels did not meet code requirements, but were granted an exemption; internal corrosion inspections were recommended but never performed; and finally, a specific warning was made to the company by its insurer. But at every level, the risk of catastrophic vessel failure was overlooked and public safety, literally and figuratively, fell through the cracks," CSB Chairperson Rafael Moure-Eraso said.

"The video shows how cracking on and near the inner diameter of the vessel fragment reduced the vessel material toughness, which eventually led to large flaws resulting in the catastrophic failure," CSB Lead Investigator Johnnie Banks added.

This article originally appeared in the January 2014 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Download Center

  • Safety Metrics Guide

    Is your company leveraging its safety data and analytics to maintain a safe workplace? With so much data available, where do you start? This downloadable guide will give you insight on helpful key performance indicators (KPIs) you should track for your safety program.

  • Job Hazard Analysis Guide

    This guide includes details on how to conduct a thorough Job Hazard Analysis, and it's based directly on an OSHA publication for conducting JHAs. Learn how to identify potential hazards associated with each task of a job and set controls to mitigate hazard risks.

  • A Guide to Practicing “New Safety”

    Learn from safety professionals from around the world as they share their perspectives on various “new views” of safety, including Safety Differently, Safety-II, No Safety, Human and Organizational Performance (HOP), Resilience Engineering, and more in this helpful guide.

  • Lone Worker Safety Guide

    As organizations digitalize and remote operations become more commonplace, the number of lone workers is on the rise. These employees are at increased risk for unaddressed workplace accidents or emergencies. This guide was created to help employers better understand common lone worker risks and solutions for lone worker risk mitigation and incident prevention.

  • EHS Software Buyer's Guide

    Learn the keys to staying organized, staying sharp, and staying one step ahead on all things safety. This buyer’s guide is designed for you to use in your search for the safety management solution that best suits your company’s needs.

  • Vector Solutions

Featured Whitepaper

OH&S Digital Edition

  • OHS Magazine Digital Edition - July August 2022

    July / August 2022

    Featuring:

    • CONFINED SPACES
      Specific PPE is Needed for Entry and Exit
    • HAZARD COMMUNICATION
      Three Quick Steps to Better HazCom Training
    • GAS DETECTION
      Building a Chemical Emergency Toolkit
    • RESPIRATORY PROTECTION
      The Last Line of Defense
    View This Issue