Explosion at Mass. Maintenance Facility Leads to $44,000 Penalty

An employee was performing welding on a pontoon boat when the hot work ignited vapors from within the boat's interior. OSHA found that the boat had not been adequately ventilated to ensure the escape of flammable gasses before welding.

OSHA has cited SPS New England with 11 alleged serious violations of safety standards following a July 15 explosion at the company's maintenance facility in Salisbury, Mass., that injured a worker. The Salisbury-based construction contractor faces a total of $44,000 in proposed fines, chiefly for deficiencies in welding procedures and safeguards.

The employee was performing welding on a pontoon boat when the hot work ignited vapors from within the boat's interior. OSHA found that the boat had not been adequately ventilated to ensure the escape of flammable gasses before welding; welding had been performed in the presence of an explosive atmosphere; guards had not been set up to confine heat, sparks and slag; combustibles were not properly shielded; a welding area and procedures had not been established; authorization had not been secured for the welding; a fire watch was not provided; no individual had been designated to authorize and oversee the welding; and the work area had not been adequately inspected beforehand. In addition, there were electrical hazards stemming from damaged welding cables and an ungrounded extension cord.

"This incident graphically shows what can and does happen when proper welding preparations and procedures are not followed," said Jeffrey A. Erskine, OSHA's area director for Essex and Middlesex counties in Massachusetts. "While it is fortunate that this worker was not killed, he was needlessly injured. This incident should not have occurred."

A serious citation is issued when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known. Information on welding, cutting and brazing hazards and safeguards is available online at http://www.osha.gov/SLTC/weldingcuttingbrazing/index.html.

Download Center

  • OSHA Recordkeeping Guide

    In case you missed it, OSHA recently initiated an enforcement program to identify employers who fail to electronically submit Form 300A recordkeeping data to the agency. When it comes to OSHA recordkeeping, there are always questions regarding the requirements and ins and outs. This guide is here to help! We’ll explain reporting, recording, and online reporting requirements in detail.

  • Incident Investigations Guide

    If your organization has experienced an incident resulting in a fatality, injury, illness, environmental exposure, property damage, or even a quality issue, it’s important to perform an incident investigation to determine how this happened and learn what you can do to prevent similar incidents from happening in the future. In this guide, we’ll walk you through the steps of performing an incident investigation.

  • Lone Worker Guide

    Lone workers exist in every industry and include individuals such as contractors, self-employed people, and those who work off-site or outside normal hours. These employees are at increased risk for unaddressed workplace accidents or emergencies, inadequate rest and breaks, physical violence, and more. To learn more about lone worker risks and solutions, download this informative guide.

  • Job Hazard Analysis Guide

    This guide includes details on how to conduct a thorough Job Hazard Analysis, and it's based directly on an OSHA publication for conducting JHAs. Download the guide to learn how to identify potential hazards associated with each task of a job and set controls to mitigate hazard risks.

  • The Basics of Incident Investigations Webinar

    Without a proper incident investigation, it becomes difficult to take preventative measures and implement corrective actions. Watch this on-demand webinar for a step-by-step process of a basic incident investigation, how to document your incident investigation findings and analyze incident data, and more. 

  • Vector Solutions

Featured Whitepaper

OH&S Digital Edition

  • OHS Magazine Digital Edition - October 2022

    October 2022


      Here's Why Constant Bending Can Be Troublesome
      How Artificial Intelligence in Revolutionizing Jobs
      Choosing the Right Respiratory Protection
      Managing Cold Stress with the Proper PPE
    View This Issue