NHTSA Proposes 'Brake-Throttle Override' to Improve Vehicle Safety

The proposal aims to minimize the risk that drivers will lose control of their vehicles as a result of either accelerator control system disconnections or accelerator pedal sticking or floor mat entrapment.

The U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) recently proposed to update existing safety standards to ensure drivers can better stop a vehicle in the event both the brake and accelerator pedals are depressed at the same time. NHTSA research indicates a “Brake-Throttle Override” requirement will help reduce the risks of high-speed unintended acceleration and prevent crashes involving a stuck or trapped accelerator pedal by allowing the driver to maintain control through normal application of the vehicle’s brakes.

“America’s drivers should feel confident that anytime they get behind the wheel they can easily maintain control of their vehicles—especially in the event of an emergency,” said U.S. Transportation Secretary Ray LaHood. “By updating our safety standards, we’re helping give drivers peace of mind that their brakes will work even if the gas pedal is stuck down while the driver is trying to brake.”

The NHTSA proposal aims to minimize the risk that drivers will lose control of their vehicles as a result of either accelerator control system disconnections or accelerator pedal sticking or floor mat entrapment. The proposal would amend Federal Motor Vehicle Safety Standard (FMVSS) No. 124, Accelerator Control Systems, by updating the throttle control disconnection test procedures for all passenger cars, multipurpose passenger vehicles, trucks and buses, regardless of weight. For vehicles that have Electronic Throttle Control (ETC) and a gross vehicle weight rating (GVWR) 10,000 pounds (4,536 kilograms) or less, the proposal would also require manufacturers include a Brake-Throttle Override (BTO) system to ensure the vehicle would stop if both the brake and the accelerator pedals are simultaneously applied. Many manufacturers are already including BTO systems in their vehicle fleets.

“We learned as part of the comprehensive NASA and NHTSA studies of high-speed unintended acceleration that brake override systems could help drivers avoid crashes,” said NHTSA Administrator David Strickland. “While NHTSA’s defect investigation program will continue to monitor and consider consumer complaints of any potential vehicle safety issues, this proposal is one way the agency is helping keep drivers safe and continuing to work to reduce the risk of injury from sticky pedals or pedal entrapment issues.”

Product Showcase

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

Featured

Webinars