NTSB Issues Recommendations for Emergency Locator Transmitters

The agency issued the recommendations following the Aug. 9 plane crash that killed former Sen. Ted Stevens and five other passengers.

The National Transportation Safety Board recently issued two safety recommendations to the Federal Aviation Administration requiring a detailed inspection of all emergency locator transmitters (ELT) installed on general aviation aircraft to ensure that their mountings maintain their retention capabilities during an accident sequence. NTSB issued the recommendations following the Aug. 9 plane crash that killed former Sen. Ted Stevens and five other passengers.

An ELT is designed to broadcast a signal through an externally mounted antenna that contains the aircraft's registration information and the global positioning system coordinates of the original signal. Also, the "homing signal" can be detected locally by other aircraft, air traffic control facilities, or rescue personnel who use a compatible receiver.

"In this case, the airplane was equipped with a functioning 406 megahertz ELT, which can be a tremendous aid to search and rescue operations," said NTSB Chairman Deborah A.P. Hersman. "But this vital life-saving technology won't do anyone any good if it doesn't stay connected to the antenna."

On Aug. 9, 2010, a de Havilland turbine Otter airplane crashed in mountainous tree-covered terrain approximately 10 miles from Aleknagik, Alaska. Nearly five hours after the crash, volunteer airborne search personnel located the aircraft approximately 19 miles from where the flight originated. The pilot and four passengers, including former Sen. Ted Stevens, sustained fatal injuries. The other four passengers were seriously injured.

Aircraft involved in the search and rescue efforts and satellites did not detect any ELT signals. Following the discovery of the airplane, a pararescuer found the ELT loose on the floor of the airplane. The ELT had activated but had separated from its mounting bracket and antenna.

View the recommendation letters.

Product Showcase

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

Featured

Webinars