CPSC Hosts Town Hall on Toy Safety

At a Town Hall meeting held in New York City, Consumer Product Safety Commission Chairman Inez Tenenbaum was joined by parents and consumers to talk toy safety. The discussion centered around new federal safety rules that are in place for toys that will give American consumers greater confidence when they go shopping this holiday season.

Tenenbaum informed the audience that starting this year:

  • federal limits for lead in paint on children's toys dropped to 90 parts per million, which is among the lowest in the world;
  • toys for children 12 and younger must now be tested and certified that they meet the new lead in paint limits;
  • children's toys cannot be made or sold with more than 300 parts per million of total lead;
  • children's toys cannot be made or sold with more than 0.1% of six prohibited phthalates;
  • and most children's toys now fall under mandatory standards, instead of voluntary ones.

"It is important to make safety a priority when making your holiday toy purchases this season," Tenenbaum said. "CPSC has worked hard this year to give parents and grandparents greater confidence that the toys they seek to purchase have enhanced safety protections for children."

So far in calendar year 2009, CPSC has had 38 toy recalls, which is down from 162 in 2008 and 148 in 2007. Toy recalls involving lead paint are also down. This year there has been 14 recalls involving lead, down from 63 in 2007 and 85 in 2008. CPSC attributes this decline to increased enforcement at the ports, cooperation with other nations, consumer awareness and education and compliance by the industry with new federal safety rules.

For 2008, the commission has reports of 19 toy-related deaths and about 172,700 hospital emergency room treated toy-related injuries (pdf) to children under 15. Almost half of these injuries, approximately 82,300 were to children younger than 5 years of age. Most of the deaths were associated with drowning, motor vehicle involvement, or airway obstruction from a small toy or small part of a toy.

Here are some safety steps consumers can take while shopping this holiday season:

  • Scooters and other Riding Toys - Riding toys, skateboards and in-line skates go fast and falls could be deadly. Helmets and safety gear should be worn at all times and be sized to fit.
  • Small Balls and other Toys with Small Parts - For children younger than age three, avoid toys with small parts, which can cause choking.
  • Balloons - Children can choke or suffocate on un-inflated or broken balloons. Keep un-inflated balloons away from children younger than eight years old. Discard broken balloons at once.
  • Magnets - For children under age six, avoid building or play sets with small magnets. If magnets or pieces with magnets are swallowed, serious injuries and/or death can occur.

Once the gifts are open:

  • Immediately discard plastic wrappings or other packaging on toys before they become dangerous play things.
  • Keep toys appropriate for older children away from younger siblings.
  • Charging batteries should be supervised by adults. Chargers and adapters can pose thermal burn hazards to young children. Pay attention to instructions and warnings on battery chargers. Some chargers lack any device to prevent overcharging.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

Featured

Artificial Intelligence