MSHA Issues Mine Closure Order for Failure to Pay Penalties

The Department of Labor's Mine Safety and Health Administration (MSHA) has issued a closure order under Section 104(b) of the Mine Safety and Health Act of 1977 (Mine Act) to Snapco Inc. of Buchanan County, Va., after the mine operator failed to pay $396,576.84 in delinquent penalties and then ignored a demand to correct the failure. The order closes production at the company's Mine Number 2; the penalties stem from at least 360 violations cited at that operation.

"When mine operators fail to meet their legal obligations, MSHA must take appropriate action," said Michael A. Davis, MSHA's deputy assistant secretary for operations. "This company had been given every opportunity to pay its fines and was warned that failure to pay could lead to a closure order."

In a letter dated April 3, MSHA, through counsel, formally demanded that Snapco Inc., pay its delinquent penalties. The parties engaged in some discussion, but Snapco Inc. failed to make suitable arrangements to pay its penalties. MSHA issued the citation on April 16, and when it became evident that the operator would not address the violations, MSHA issued a closure order on April 22.

This underground coal mine operator also recently received notice of a potential pattern of violations. On March 16, MSHA notified Snapco Inc. that it had a potential pattern of violations of mandatory health or safety standards under Section 104(e) of the Mine Act at its Mine Number 2. If Snapco Inc. reopens, the company will be required to significantly reduce its violation frequency rate or face issuance of a Notice of a Pattern of Violations. Such notice would result in MSHA issuing an order to withdraw miners from the affected area until the cited condition is corrected each time a significant and substantial violation is found at the mine.

Product Showcase

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

Featured

Webinars