Standard in the Works for Protection of Control Rooms
Control rooms are the heart of operations for many facilities that could be vulnerable to attack, such as power plants (particularly nuclear), water treatment facilities, oil and gas refineries, rapid transit systems, bridges and dams, among other structures.
Subcommittee E54.05 on Building and Infrastructure Protection is currently working on a proposed new standard that deals with control rooms, WK18256, Guide for the Physical Protection of Control Rooms for Infrastructure Facilities Against Forced Entry and Ballistics Attack. Subcommittee E54.05 is under the jurisdiction of ASTM International Committee E54 on Homeland Security Applications.
WK18256 will be a useful tool for the design and renovation of control rooms and enclosures for infrastructure facilities, providing designers with a checklist to ensure that all procedures have been followed regarding adequate security and protection.
According to James Stapleton, president and CEO of Habersham Metal Products Co., and chair of Task Group E54.05.02 on Building Exteriors, WK18256 will cover all aspects of control rooms including walls and ceilings, which are considered part of the security envelope. "This proposed guide will address all components of the security envelope of a typical control room and how it should be designed and performance tested to provide the appropriate protection against attack, depending upon the control room vulnerability," Stapleton said. Other aspects of control rooms to be considered include forced entry and ballistic-resistant doors, windows and other opening protectives, such as HVAC louvers, roof hatches, vents and wiring chases.
Stapleton stated that the subcommittee is currently seeking participation in the further development of WK18256, particularly from the design and architectural community and from agency representatives who manage, operate, design and construct control rooms. "We need input from them on security concerns, and their knowledge and past experiences regarding various threats and protection methods," Stapleton stated. "This work is very important because if control rooms for high value infrastructure facilities are not adequately protected, attackers can enter and either destroy or reprogram the controls in order to cause potentially catastrophic damage and loss of life."
For technical Information, contact James Stapleton, Habersham Metal Products Co., Cornelia, Ga. (phone: 706-778-2212; [email protected]). Committee E54 meets June 23-25 during the June committee week in Denver.